12 imanes de neodimio para dirigir la luz en muchos ángulos
Úselo como herramienta de recogida
Interruptor de encendido/apagado deslizante trasero
Resistente al clima
15 lúmenes
1 LED blancos Lumen-Tech
Cuerpo ABS transparente rojo
12 imanes de neodimio (tierras raras)
Interruptor de encendido deslizante
Duración: 10 horas
3 pilas LR44 (incluidas)
Tamaño: 1,6 pulgadas de alto x 1,5 pulgadas de diámetro
Resistente al clima
Modelo # 00105
1 año de garantía
[1] Mina de luz magnética
Luz LED magnética manos libres
La mina de luz magnética de STKR Concepts utiliza un LED Lumen Tech y 12 potentes imanes de neodimio (tierras raras) que le permiten pegarla a cualquier superficie de acero o apoyarla en cualquier superficie como un trípode o cuádruple y apuntar la luz hacia el trabajo. -espacio en casi cualquier ángulo.
Los usos potenciales son infinitos
Los profesionales, incluidos técnicos automotrices, electricistas, plomeros y contratistas de HVAC, querrán tener uno a mano, ya que es lo suficientemente pequeño como para caber en áreas estrechas y apuntar un potente haz de luz donde más se necesita. Gracias a sus 12 imanes de neodimio, también funciona como herramienta para recoger tornillos, clavos y herrajes caídos.
Los aficionados al bricolaje y los propietarios de viviendas también encontrarán cientos de usos para la luz LED magnética de STKR Concepts. Úselo cuando trabaje en un motor, cambie una llanta, cablee un cine en casa, encienda un disyuntor o gatee debajo de un mostrador o fregadero. Se adherirá al refrigerador, lo que la convertirá en la linterna ideal para toda la familia y es excelente para tenerla en viajes de campamento.
Características
LED brillante
12 imanes de neodimio para dirigir la luz en muchos ángulos
Úselo como herramienta de recogida
Interruptor de encendido/apagado deslizante trasero
Resistente al clima
Qué está incluido
Mina de luz magnética
Pilas LR44 incluidas.
Proposición 65 de California ADVERTENCIA: Este producto puede exponerlo a sustancias químicas que incluyen ftalato de bis (2-etilhexilo) DEHP y ftalato de dibutilo DBP, que el estado de California reconoce como causantes de cáncer. Para obtener más información, visite www.P65Warnings.ca.gov .
The STKR Concepts Magnetic Light Mine uses a Lumen
Tech LED and 12
powerful neodymium (rare earth) magnets that allow you to stick it to any steel surface or rest it on any
surface as a tripod or quad-pod and aim the light toward the work-space at almost any angle.
Potential Uses are Endless
Professionals, including automotive technicians, electricians, plumbers, and HVAC contractors, will want
to
have one on hand, as it is small enough to fit into tight areas and aim a powerful beam of light where
it is
needed most. Because of its 12 neodymium magnets, it also works as a pick-up tool for dropped screws,
nails,
and hardware.
Do-it-yourselfers and homeowners will also find hundreds of uses for the STKR Concepts Magnetic LED
Light.
Use it when working on an engine, changing a tire, wiring a home theater, switching on a breaker, or
crawling around under a counter or sink. It will stick to the fridge, making it the go-to flashlight for
the
whole family, and it's great to have on camping trips.
Features
Bright LED
12 Neodymium magnets to aim light at many angles
Use as a pick-up tool
Back slider on/off switch
Weather resistant
What's Included
Magnetic Light Mine
LR44 batteries included
Frequently Asked Questions
The switch on the Light Mine can stick when first being used, so I would first like to make sure
that you have it completely pushed over to the “ON” side. Sometimes the switch needs to be
pushed over hard, using the butt of your thumb. The switch can click once but needs to click
over a little farther to stay on.
While it is possible to change the batteries in the Magnetic Light Mine, please be very careful. Replacing the batteries does run the possibility of damaging the whole unit. Although, if done with care, there should not be an issue.
Pressing on the locking tabs with a flat-head screwdriver will open the body. Pressing too hard will snap/break the locking tab and/or tab receiver, this is the difficult part so be very careful.
The batteries are LR44 alkaline. Silver oxide equivalents (SR44) can be used but do not mix alkaline batteries with silver oxide batteries. (Silver Oxide batteries will last longer but the initial brightness of the LED will be less) When removing the batteries, you will notice they are shrink-wrapped. Your replacement batteries will need to be isolated as well. Clear packaging or electrical tape works well, just leave the ends exposed for the electrical contacts. (Please dispose of batteries properly)
Click to see the MLM battery diagram
Want First Dibs?
Be the first to know about new product drops and exclusive offers.
Al seleccionar una opción, se actualiza toda la página.